alarm system and the idiot that fitted it

leemo

.040 Over
Joined
Jun 25, 2006
Messages
60
Location
Manchester UK
I have a data tool alarm fitted and when after I remapped the bike and did the 12 min adaption reset, then alarm would not let me arm /unarm with the fob. The unit has been fitted under the tank over the hottest part of the bike ???. Seems a bit dumb when there is plenty of room in the side panels. After the engine cooled down the alarm would work with some reluctance. I do not as yet know if the fitter has used the alarm connector or wired direct in to the harness. Can any one tell me where the alarm plug is so check. I want to remove the thing as I don't know what the pin code is if the fob stopped working. Thank you all, great to be riding again now the rocket is mapped correctly.
 
Hi Peter, firstly you need to get the "Shorting Link" p/n T2500396, couple of quid.
Bad news is - If under the headstock like mine, it's radiator off and real headache - but when you find it just unplug it and plug in the Shorting Link.
Good luck!
 
Back
Top