Rob_The_Builder
.020 Over
So with the help of mully95 I bought and installed a supertrapp exhaust on my bike. For more on that you can refer to this thread:
Anyone tried XB Extremeblasters?
Originally I installed it without the mid pipe and with factory TOR map and it sounded great but I think the engine was running lean (big pops on deceleration and engine running a little hotter) so last night I received the 15 degree angled pipe in the mail and put it on and loaded up a map that Hans0 sent me couple of years ago for when I install actual after market pipes (not TORs).
It looks much better with the pipe but the sound's been muffled a lot. Mind you that noting is completely sealed on the joints and couplings so my question to all the "technicians" here is do you think the muffled sound is:
A- because of the mid-pipe
B- Because of the unsealed joints
C- Because of the new map (richer on AF table and with different values on the F tables. I dont know what these numbers on F tables represent and if someone tells me that would be great)
By the way at the moment I am running it with closed end cap as oppose to mully95 open end cap.
One last thing and this is just my opinion and mean no disrespect to anyone and anyone's opinion. I think running with secondaries completely open is just bad idea specially for riders like me who are not as experienced as most of you on this forum. You can easily meet one of our biggest adversaries, Mr. asphalt, if you are jerky with the throttle on the turns on lower gears.
Thank you and ride safe
Anyone tried XB Extremeblasters?
Originally I installed it without the mid pipe and with factory TOR map and it sounded great but I think the engine was running lean (big pops on deceleration and engine running a little hotter) so last night I received the 15 degree angled pipe in the mail and put it on and loaded up a map that Hans0 sent me couple of years ago for when I install actual after market pipes (not TORs).
It looks much better with the pipe but the sound's been muffled a lot. Mind you that noting is completely sealed on the joints and couplings so my question to all the "technicians" here is do you think the muffled sound is:
A- because of the mid-pipe
B- Because of the unsealed joints
C- Because of the new map (richer on AF table and with different values on the F tables. I dont know what these numbers on F tables represent and if someone tells me that would be great)
By the way at the moment I am running it with closed end cap as oppose to mully95 open end cap.
One last thing and this is just my opinion and mean no disrespect to anyone and anyone's opinion. I think running with secondaries completely open is just bad idea specially for riders like me who are not as experienced as most of you on this forum. You can easily meet one of our biggest adversaries, Mr. asphalt, if you are jerky with the throttle on the turns on lower gears.
Thank you and ride safe