2014 roadster parting out

Kan ik de meters kopen?
Doe mij een aanbod waar we beiden tevreden mee zijn.
Werkt prima en ik kan een paar foto's plaatsen als je wilt.
Herman
PS: Ik denk dat het harnas in orde is, dat weet ik zeker als ik de tank optil.
 
it was not carpenters fault my friend had ask me about the manual timing adjuster and before i could get back to him he said that he was hearing a noise and had set it one and one half turns in. i have not pulled the front so i assume that it broke one or both of the guides. so all i know is all of the exhaust valves hit the pistons and are bent and stuck down about 1/4 inch
Hey Herman have you pulled the tensioner out of the engine yet. I figured it wouldn't matter with the bent valves. I'd be curious to look in the hole and see if there is a shoe on the cam chain guide ?
 
Hey Herman have you pulled the tensioner out of the engine yet. I figured it wouldn't matter with the bent valves. I'd be curious to look in the hole and see if there is a shoe on the cam chain guide ?
seems like i have been busy with the shop work that i have not checked it out i also figure it blowed the guides. all of the exhaust valves are open and bent.
i would like to get that motor fixed and in my 07 before i am to old to ride.
edit
i think that is a good idea and not much work
i would guess that it has about 6 inches of clearance
lol
 
seems like i have been busy with the shop work that i have not checked it out i also figure it blowed the guides. all of the exhaust valves are open and bent.
i would like to get that motor fixed and in my 07 before i am to old to ride.
edit
i think that is a good idea and not much work
i would guess that it has about 6 inches of clearance
lol
Ya just curious If my memory is still there I believe Steel broke his exhaust cam on his carpenter roadster. I didn't know of you had the cam cover off or not yet.
 
Back
Top