tuneecu

04-13-11 TuneECUv1.9 now released * Support KTM 690 BR, Tom

4-06-11 TuneECUv1.8.9 now released * Ability to disable ISC on Street Triple * Limit value editing tables I increased (Triumph) BR, Tom

03-27-2011 TuneECU v 1.8.8 now released Some bugs fixed Improved reading of ECU in KTM 990/1190 BR, Tom

3-11-11 TuneECUv1.8.7 now released Get latest Revision here - TuneECU Links Page * Support 2011 maps for 990 SM/SMT/SMR * Added a procedure to adjust the throttle cable for KTM's BR, Tom

Looking at the tunes I can find, 260kmh seems to be the max it's set at. the program goes to 299kmh. any reason why it's not opened up all the way?

Seeing I already purchased the Dealertool, can someone tell me if the cable that came with dealertool is compatible with the tune ECU cable needed for the TuneECU program? OBDII is written on the cable and it came with a CD.

2-26-11 TuneECUv1.8.6 now released * Support models Triumph Daytona 600/650, Speed Four, TT600. * Fixed a bug on I tables (Aprilia Futura). BR, Tom

Looking for tune 20235, told this is the tune I need. I have an 09 R3T secondaries removed triple K&N's and D&D exhaust. any help would be great

I am looking for a TuneECU map for R3T with Jardines underseat filter (K&N) Can't locate one on the site. Any help would be appreciated

With the knowledgeable assistance of the French software developer of TuneECU we have seven 20050 Custom Dyno-developed Tune Maps that need to be tested on a standard Rocket III [All VINs] before we can post them to the TuneECU website. I am therefore looking for someone who has some user...

Can someone please confirm what (gears) I4, I3, I2, and I1 correspond to in TuneECU (2010 Roadster)? I thought I4 was the table for 4th & 5th gears, I3 for 3rd, I2 for 2nd, and I1 for 1st, but was then told that one of the tables is also for neutral (?). I3 seems quite different in comparison to...

HI EVERYBODY!! I use TuneECU and I want to download on my 2007 RIII standard (TORs and cat-bypass) the Full Power map 20050-2.. the map already loaded is the 20226, the only 20050-2.hex I found is this: http://www2.peelo.org:8080/rikunpaskat/20050-2Map-JeppisDynotettu-Tyhjakayntinostettu.hex...

OK - not as cheap as EBAY - but I distrust EBAY. :cool: The guy there sounds really switched in - Told him about TuneECU and he was well enthusiastic.

I am using v1.6.8 FYI. Here is what happened, I was finishing up with some minor adjustments with the L tables, hit save and downloaded the tune to my bike. Before I cranked it up, I was looking over the L tables, which looked good, and just so happened to click to open the I1 table and couldn't...

I have a 2005 Rocket, it is not the touring model. I removed standard pipes and cat. Installed the D&D pipes and left the baffles in that they came with. I went to Triumph, and they gave me the Triumph tune for modifies exhaust with no cat. The bike runs and idles and pulls very good. I just...

TuneECU COM Port Issue Problem fixed, loose USB connector:)

What TuneECU downloads are available for thr Roadster? I just installed the triple K&N’s yesterday. My next plan is to install the jardine header with pipe (that may or may not be open with no baffle) on the right side only. Thanks.

I have been informed that I am not charging enough for tuning with TuneEdit/TuneBoy or TuneECU. It seems that one of the members here has contacted a shop on the left coast of the USA about getting his R3 tuned with TuneECU. He was told that he would need to purchase a Power Commander and that...

Looking for a knowledgeable wrench out there to translate the following TuneBoy instructions to TuneECU equivalents. I need to replace my primary TPS tonight and don't want to screw it up.

Can't get it to work, anyone know what I am doing wrong? I have loaded the TuneEcu drivers, I have the key file in the folder with the TuneEcu.exe file. TuneEcu tells me it can't connect to bike to check connection then turn bike off and on. Any ideas????