This TuneBoy image shows the three cyclinder output for What??? Is this what I need to be observing when balancing the throttle bodies? If I had my bike to hook it up I could answer my own question.
Some may say, "he is some sort dumb, but he ain't plum dumb". I'll be getting my bike back in...
i wanted to load and save the current tune in the tuneboy but it told me is was an unknown tune and would not take it. is there anything special i need to do to make this work?
Frank
i will have my tuneboy in a day or 2 and want to know which tune to use, as of now all i have done is the thunderbike exhaust (which has its own cat delete). which tune would be the best?
Frank
Hey all this is my first post here, although Ive had my 06 rock for awhile and do constantly lurk on here !!.
Anyway heres the guts, Ive finaly decided to go tuneboy and unleash some of that grunt the powers that be dont want us to have.
Im running the thunderbike 3 into 1 into 2 muffler setup...
Just an FYI... My web filter blocked the download:
This email is from the Barracuda Spyware Firewall. We have detected and blocked the download of: SPYWARE [SPYWARE Spyware.Farsighter]
from the server:www.tuneboy.com.au
with the URL...
HD issued profit warning late last week, citing a substantial reduction in anticipated 3rd QTR sales as well as an EPS projection of $ 3.69 to 3.77 for this year, versus $3.93 in '06.
YTD, HD's stock is down 33.02%, BTW. This, to many analysts, means reduced consumer spending in general and on...
Howdy Boys!!
I am currently Running Tors, cat bypass underseat K&N and iridium plugs.I have the triumph source tune circa June 2005 for that config which I am quite happy with. Bike runs straight up to 140mph indicated some popping on idle decel which reminds me I am being a ***** for backing...
Hey Guys I wondering, if I get the D&D Pipes and install them myself. Will the 12 minute tune be sufficient or will I have to get a remap and buy a tuneboy too.
Dave
06 Classic R&W
Still having trouble finding drivers for cable in device manager on vista lap-top.
rockenrobert
gotta see the world, it will only take a minute
Link Removed
I have downloaded the tune boy from the web site and have ordered the cable and cd, which is suppose to arrive on Tuesday of next week. When playing around with the editor the rev limit is set at 6300, and when I click on it to try to change it, it doesn't do anything, I was thinking about...
I need some help guys. I want to change my pipes. I have researched and it seems that I would probably like the sound of the Jardines the best. My nearest dealer talked me out of those and said the TOR pipes are the way to go because there is a Triumph tune ready for those pipes? Then you get...
I decided to go the route of PCIII plus Tuneboy. I loaded Wayne's 20050_3 tune and hooked up the PCIII and got a custom dyno tune. I have triple K&N's and Maddog exhaust with cat bypass. I ran it with the claw cover removed and the coolant overflow has been relocated.
The first run without...
Anybody do the ISCV reset in Tuneboy?
I found that by clicking reset ISCV on the bottom of the sensors screen that the voltage reading for the primary TPS is real time rather than updating every 15 seconds or so. There is also scrolling instructions on the bottom of the screen that is a four...
I need some help. Can't get tuneboy to talk to my bike. when you bring up tune edit it just keeps scrolling through messages about initialization string sent, etc. the led on the cable blinks, but it never pulls the ecu # or anything. [This is a different computer than I used before.] I...
Thanks Wayne, I'll keep the Rev limit set as you recommend.
To adjust the speedo for the 7% factory set error, change the Wheel Speed Constant value to 3249. Again, thanks Wayne.
Here are the dyno graphs of my bike,before and after cams and dyno tune.My bike pulled pretty good numbers straight up but it was very very lean.
Neville Lush in SA done all work on the bike,fitted lock up clutch,fitted his cams and done all the dyno work.
Man he is one switched on dude and...
If anyone is interested in Tuneboy, on the 675 forum there is a group buy. It works out to be about $367US. That's about $50 less than on newr3.com. Plus free shipping.
http://www.triumph675.net/phpBB2/viewtopic.php?t=11574
Does the Tuneboy show you if your throttle bodies are in sync or not? I know you adjust it mechanically but I was wondering if the Tuneboy Diagnostic program provides this feature. It looks like it does but I want to make sure I don't need a Morgan Carbtune or some other tool like it.