Search results for query: *

  • Users: bebsy
  • Content: Threads
  • Order by date
  1. bebsy

    Helicoil blues

    I was happily applying the required torque on the lower stud on the starter motor and this happens😏 just asking as I can't find any info of the required oversize helicoil fitting for the M8 now as it seems to already have one fitted? or maybe not? as it has an outside circumverence of the same...
  2. bebsy

    Clutch lifter spacer??

    Evenin all I'm just finishing putting this motor back together all parts were boxed separately I'm left wandering as looking at the manual I seem to be missing a spacer no 27?? Which looks like it's supposed to back the wavy one up? parts were replaced a while back and I remember scratching my...
  3. bebsy

    Gearbox rebuild question

    When fitting 3rd and 4th gear on the output shaft it states to fit the thrust washer and circlip alongside the shouldered spline bush upon doing so there is no room for the circlip on 4th gear when you get to it, am I right in thinking the shouldered version of the bushes replaces the thrust...
  4. bebsy

    2nd gear dog mod

    Another wtf moment when I bought this bike a few years back the guy said he'd had 2nd gear replaced but when he got it back he said it was unridable so he took it back again, it looks like the updated dog ring has been played with question is why? And when I replace it would I be faced with...
  5. bebsy

    2nd Gear Slop

    Could someone pls tell me what is the difference with the upgraded parts and what it consists of for the tranny I have a black motor it's 2006 I don't want to end up buying old stock, Just about to order some dog rings and gears and is it normal to have more slop in second gear on the output shaft
  6. bebsy

    Detent catastrophe... Almost

    A few years ago I replaced a broken detent spring nothing unsuall there it was hanging broken with the lower part no were to be found screens clear ect ect left it at that the pay back finally arrived last wk bike started to jump out of 2nd & 3rd under load so flipped the casing it was a bitter...
  7. bebsy

    Stator bolt rotation when removing

    No mention in the handbook I suppose that answers the question but just to be sure could someone put me out my misery😬
  8. bebsy

    Fuel holder assembly wanted

    I don't suppose someone out there has a fuel arm assembly for a 2006 r111 for sale Bike was in storage drained the tank left the cap open you can guess the rest
  9. bebsy

    Not how I remember

    Alls been well using tune ecu 2.5.8 or so I thought untill I opened up the map file map which shows up ok but when clicked on idle the page looks like this? Been meaning to get the android version for a long time but this has worked fine untill now I'm guessing now is the time
  10. bebsy

    Tps % at full throttle

    Evening all Could someone tell me what % the tps is supposed to sit at on full throttle tuneecu, ive seen one set at 94% mine is 96% got me wondering after doing the full reset and all being bang on, however when I get back from a run and check the specs again they are slightly out, I have a...
  11. bebsy

    Idle Stepper removal

    Good evening all Could someone pls tell after removing the idle stepper motor and setting the idle manually do you then reset the tps
  12. bebsy

    P0560 reference

    Hi I see P0560 refers to ecm power malfunction could someone tell me what that refers to, I'm not sure if it's the ignition as when I turn ythe key it loses concatact unless I turn it slowly and find a sweet spot the lights stay on but when I press the starter it blacks out, now I don't seem to...
  13. bebsy

    Chain guide oil pump

    After opening up the front casing I noticed I've not got a chain guide as depicted in the manual but it's not on the parts list for sale. Has anybody got one of these to sell
  14. bebsy

    Chain guide oil pump

    After opening up the front casing I noticed I've not got a chain guide as depicted in the manual but it's not on the parts list for sale. Has anybody got one of these to sell
  15. bebsy

    Part of detent missing

    Hi all Well I got a mile down the road and the detent went, Stripped it down last night main part of the spring was still hanging there but the hook piece that goes through the eyelet was missing I've searched every crevice with the magnetic wand dropped the sump checked the screens and still...
  16. bebsy

    PC Zero map question

    Morning all, if I I ride for 3hrs for a dyno tune would it be OK to hook up a PC with a zero map and run along side the current map from tune ecu till I get there just save time
  17. bebsy

    Engine rebuild gone west

    Just had a 2005 engine rebuild for a friend's bike after throwing a valve replaced with a new head and all the dressings complete new oil system new oil pressure sensor and more now this is the ball ache question, when I started it up idled fine oil light went out but when the engine started to...
  18. bebsy

    Any bright sparks out there

    Does anybody know what the voltage should be for the live to the back of the oil sensor
  19. bebsy

    Idle help tune ecu

    I'm trying to raise the idle get as far as the temp settings but not sure which one to click on, I'm just wanting to raise idle when at running temp to 950rpm any help appreciated, answered my own question there all done no worries
  20. bebsy

    Tune ecu cloning

    Evening all Could someone pls tell me if its OK to load another Rocket onto my existing tune ecu or would it need to be setup separately
Back
Top