Gears not engaging, after being rough with the gear shifter.

TURBO200R4 · Sep 4, 2025

you will have to block the engine then lift the bike frame.
1st remove the oil sending sensor (at the back and the right side of block)
a beam, a swing set, a cherry picker and a good come along,

oteczdmitriy · Sep 5, 2025

Another way, if you're not in a hurry, is to do the work yourself, without a lift or friends. You'll need a rack to store all the motorcycle parts)

leocohete · Sep 5, 2025

oteczdmitriy said:
Another way, if you're not in a hurry, is to do the work yourself, without a lift or friends. You'll need a rack to store all the motorcycle part

I ’ve got at least 7 days to dedicate to the bike, and a buddy is letting me use his one-car garage. I figure that’s plenty of space. What’s stressing me more is the teardown—pulling the engine and getting everything apart. I know I’ll need a lift and a crane, but is there anything else I should have ready?

leocohete · Sep 5, 2025

TURBO200R4 said:
you will have to block the engine then lift the bike frame.
1st remove the oil sending sensor (at the back and the right side of block)
a beam, a swing set, a cherry picker and a good come along,

I need to take apart the front wheel (forks, handlebar etc) and rear wheel or I can lift the bike with the wheels?

oteczdmitriy · Sep 5, 2025

The front part does not need to be disassembled. The rear part, including the rear swingarm, wheel, fender, and air filter box (to release the wires from the bottom of the engine), must be removed

Kevin frazier · Sep 5, 2025

Different approaches

Kevin frazier · Sep 5, 2025

If you post your parts list others may tell you what your missing.

oteczdmitriy · Sep 5, 2025

Kevin frazier said:
Different approaches

The first photo might be confusing. Or am I missing something?

Kevin frazier · Sep 5, 2025

oteczdmitriy said:
The first photo might be confusing. Or am I missing something?

There probably all confusing, im a red neck with little capability

Kevin frazier · Sep 5, 2025

Now days i like to make it a roller then drop the engine, this is last time, drive shaft is out ofcourse, roller.

Gears not engaging, after being rough with the gear shifter.

TURBO200R4

stand up straight and grab the world by the a$$

oteczdmitriy

35 season

leocohete

.020 Over

leocohete

.020 Over

oteczdmitriy

35 season

Kevin frazier

Widowmaker!

Attachments

Kevin frazier

Widowmaker!

Attachments

oteczdmitriy

35 season

Kevin frazier

Widowmaker!

Kevin frazier

Widowmaker!

Attachments

Similar threads

Forums

Features

Forum Usage