Assuming that the shade tree mechanic has the manifolds removed and is staring at the bare trottle bodies, how does one use TuneECU to balance the TBs?
Basically the same steps, other than in TuneECU the different MAP values for each throttle bore will be displayed in the DIAGNOSTICS page, on the left side.
Adjusting the values to match is done in the same manner as in the link above.
Remember, you are BALANCING or MATCHING the values, not targeting a specific value.
Sorry for being such a PITA. I do not see the MAP values on the Diagnostics page other than the one gauge in the middle of the left side. Please see below:
Are you referring the the guages for each Cylinder on the TESTS page?
I'm just trying to avoid confusion for myself and others. Again sorry for being so persistent with these questions.
Tom,
My 2003 Tiger 955i does not show the same screen under the 'Test' tab.
Is there a way I can balance the throttle bodies using TuneECU for my Tiger?
I am thinking this may be because the ECU is different?
Tom,
My 2003 Tiger 955i does not show the same screen under the 'Test' tab.
Is there a way I can balance the throttle bodies using TuneECU for my Tiger?
I am thinking this may be because the ECU is different?