tuneboy.

[struddy]

Has anyone fitted tuneboy airfilters on their roadster?
Did they fit under bearclaw?
Any hp and torque improvement?
Get map?
Thx

 

[Mittzy]

Never heard of them personally.......
I rekon its best to fit a good exhaust as well as the air filter and get that thing Dyno'd.
Worth every cent. 40hp gain, that's all I have done to date - soon to change that tho.

 

[Mittzy]

Best cheapest option is to buy UNI filters through Neville Lush Racing. About $70 inc Post and will fit under the claw.

 

[struddy]

These are $50 for the filters

 

[Mittzy]

These are $50 for the filters

Ok - Are they foam or paper?
If foam, might be very similar to the Uni Filters.
Don't forget if you strip out your air box plumbing you will need a small filter for your crank case also a filter for the sensor is fitted in the plenum.

 

[BigKel]

I use the tuneboy filters on mine. They fit under the bearclaw no worries. You will need a crankcase breather as Mittzy said

 

[struddy]

I use the tuneboy filters on mine. They fit under the bearclaw no worries. You will need a crankcase breather as Mittzy said

Where do I get the crankcase breather
Did it improve your hp and torque?
Map it with their tuner?

 

[struddy]

Ok - Are they foam or paper?
If foam, might be very similar to the Uni Filters.
Don't forget if you strip out your air box plumbing you will need a small filter for your crank case also a filter for the sensor is fitted in the plenum.

Where do you recommend I get those filters?

 

[Mittzy]

Where do you recommend I get those filters?

I got mine from
http://www.flipmeisters.com/products/kn-emgo-filters/

 

[Scorp]

That's what I had on mine when I first removed the air box. They are foam with an internal spring. It come with Tuneboy, yes, they are the unifilters. Mine were red so it went faster haha. I already had the Staintune exhaust with crossover, had a dyno done before air box removal and was 126hp. Put on the unifilters and went up to 137hp, then 142hp with the tune. Changed to k&n 2780 later and now Ramair. All fit under bear claw but I did cut mine.