Tune ECU map

I have the Platt exhaust on my 07 classic. I have the Ramair and just added a viking header. I couldn't find any tunes for a header though. If I have a tune for before the header would the plug n play richin it up enough to accommodate the header?
Thanks
 

I have a map for Pauls header you could try. PM me with email and I'll send.
 
Okay. This looks like a good place to jump in..
I have a 2010 Touring and just got a set of TORS to replace the stock pipes. Thanks to Big Norm!
I am currently running the Power Tripp tune for stock-slip on pipes. And I assume that it will be fine for the TORS as is.

But I have a RamAir setup coming in next week. I have the NELS map for TORS and RamAir/K&N map I plan on loading into the ECU.
I will keep the junk box that handles the one into two split, and again I assume that is fine since the cats are inside the stock silencers on the Tourings??

I think I'll try my hand at balancing the throttle bodies while I have the plenum gone while installing the RamAir. Then do the 12 minute tune/ adaptation again. (only done that once so far).

Am I on the right track? or are there some things out there that I would be better off doing different?
Thanks all!
 

Are you willing to send this old lady the TuneEcu manual too ?
 
Sure all I need is your email address.

Another matter and maybe you can help me out:I just did download the 9000rpm PCV fine throttle map but I wonder if it is compatible with my 7000 rpm TuneEcu mapping.

I already did copy /paste the present PCV fuel tables into the 9000 PCV fine throttle mapping but there are, after copying /pasting the tables from the present PCV mapping into the 9000 one , a lot of '0' tables because of more throttle positions in the 9000 PCV mapping.
How do I have to sort out this issue
 
Last edited: