Triple K&Ns

Steve S

.060 Over
Joined
Sep 14, 2007
Messages
133
Location
Malvern, England
Thinking about fitting triple K&N filters, I dont want to cause any running problems so Im after some advice, what do I do with the sensors in the ducting? which filters fit with the bearclaw in place? any other problems to look out for?
 
Thanks, and is it ok just to remove the plenum and leave the rest of the ducting and sensors in place so it can be reversed easy?
 
Steve, since you won't look, allow me to post the link for you (from the "HOW TO" section, located on this forum :wink: ):
 
That told me!! I have read your post thanks Dave, I cant seem to get the filters in the UK, Halfords are telling me 4-5 weeks from the US.
 
The filters are the RU-2780 and are readily available here in Cow-Rona California. If you get in a hurry we can help you out. PM me.
 
Thanks Jimmy, found 3 more K&Ns that will fit without the bearclaw, RU-3780, RU-0830 and RX-4040-1, these appear to be in stock here.
 
I found without the bearclaw installed i get grease transfer onto my pant-leg from the aft-most filter that shares space with my left knee. Travelguy clued me in that the RU-2780s will fit under the bear claw if you rotate the aft-most filter to a 2:00 position. it is snug but it fits and now no more grease transfer.
 
You must log in or register to reply here.

Similar threads

08 classic with Jardine exhaust and K&N filters looking for fuel map
Replies
7
Views
382
CrzystghndKC
Easy Steer triple tree for my 2023 R3 GL.
Replies
0
Views
535
Micksan
K&N 3 filter swap, AIT sensor
Replies
5
Views
931
MtlSteve
Key barrels for Panniers issue
Replies
3
Views
565
Pump_Guy
Key Question if Fob Fails
Replies
8
Views
1K
Journeyman
Menu
Log in
Register