Triple K&Ns

[Steve S]

Thinking about fitting triple K&N filters, I dont want to cause any running problems so Im after some advice, what do I do with the sensors in the ducting? which filters fit with the bearclaw in place? any other problems to look out for?

 

[MiamiDave]

Please check the "How To" Section :wink:

 

[Billythebiker]

Think this is the one! :wink:

 

[Steve S]

Thanks, and is it ok just to remove the plenum and leave the rest of the ducting and sensors in place so it can be reversed easy?

 

[MiamiDave]

Steve, since you won't look, allow me to post the link for you (from the "HOW TO" section, located on this forum :wink: ):

 

[Billythebiker]

I've done that already :?

 

[Steve S]

That told me!! I have read your post thanks Dave, I cant seem to get the filters in the UK, Halfords are telling me 4-5 weeks from the US.

 

[Jimmy Rocket]

The filters are the RU-2780 and are readily available here in Cow-Rona California. If you get in a hurry we can help you out. PM me.

 

[Steve S]

Thanks Jimmy, found 3 more K&Ns that will fit without the bearclaw, RU-3780, RU-0830 and RX-4040-1, these appear to be in stock here.

 

[Jimmy Rocket]

I found without the bearclaw installed i get grease transfer onto my pant-leg from the aft-most filter that shares space with my left knee. Travelguy clued me in that the RU-2780s will fit under the bear claw if you rotate the aft-most filter to a 2:00 position. it is snug but it fits and now no more grease transfer.