those **** little plastic keepers

quietman

.020 Over
Joined
Apr 21, 2006
Messages
48
Location
las vegas, nv
i have an issue with those **** little plastic keepers that hold the brake lines next to the front fender. they dont seem to hold very well. the front brake line then hangs out, away from the clips.
i am tempted to just slightly loosen the brake line where it bolts to the caliper, and turn the line inward, closer to the fender.
that seems like a clean fix to me. would i need to bleed the brakes after that, or am i better off just replacing the keepers :?:
 
those all stainless clamps might be just the ticket. it would still be good to turn in the "banjos"- what is the wrench size, a 14.5 mm ? :?
 
hombre said:
Turning the banjos in slightly fixes the problem.

If you're careful... you won't have to bleed. If not... you will.

hombre
Click to expand...

Hombre is right. Mine have been off since factory...
 
You must log in or register to reply here.

Similar threads

The service light came on (A little light shaped like a wrench). It stays on.
Replies
7
Views
1K
rick danger
RIII 2005 will crank but not start - yes one more of those :-)
Replies
9
Views
1K
Helgi Hilmarsson
Just a little advice
Replies
0
Views
506
CrzystghndKC
Just a little advice.
Replies
3
Views
636
idk
I came back, little catch up advise needed.
Replies
7
Views
1K
1olbull
Menu
Log in
Register