TDSU or output shaft bearing problems
- Thread starter markc
- Start date
warp9.9
Pocałuj mnie w dupę
Those pictures are very old probably disappeared with one if the fancy site platform changes. @Doc Roc , but Mr. Hunt is a expert on tranny's (couldn't resist) anyway he is on to something though. If you let us know what you looking for one of us might have it. Say a picture of the forward bearing on the torsional damper shaft install correctly no seal facong forward so oil can get to the bearing.
Doc Roc
Supercharged
I would like to see how far the engine is lowered and how to disassemble and reassemble the damper. Is the bearing in that photo the correct way around?Those pictures are very old probably disappeared with one if the fancy site platform changes. @Doc Roc , but Mr. Hunt is a expert on tranny's (couldn't resist) anyway he is on to something though. If you let us know what you looking for one of us might have it. Say a picture of the forward bearing on the torsional damper shaft install correctly no seal facong forward so oil can get to the bearing.
Doc Roc
Supercharged
Any idea of bearing sizes and are they standard or C3?
cootertwo
Living Legend
- Joined
- Mar 24, 2013
- Messages
- 2,043
- Location
- Labelle Florida USA
- Ride
- 2013, & 2 05's R3R, 2006, 2004 Harley's, 2004 Kaw
I would like to see how far the engine is lowered and how to disassemble and reassemble the damper. Is the bearing in that photo the correct way around?
