Starter going bad

[barbagris]

I want thicker gauge and about 3 inches longer because of the added stiffness.

A quote from Mrs Warp9.9?

 

[warp9.9]

A quote from Mrs Warp9.9?

Actually after 36 years I got her saying sex I'm over that now

 

[Grumpy Ole Codger]

A little digging and I came up with these conversion tables. I normally work in mm2 but very rarely AWG. Normal rule of thumb is to go one size bigger than stated. 8 AWG does not appear to be particularly heavy duty but will also depend on the current draw of the starter motor to be fitted - see below:

 

[barbagris]

Normal rule of thumb is to go one size bigger than stated.

Mrs barbagris says Mrs GOC has it nailed.

 

[Grumpy Ole Codger]

Mrs barbagris says Mrs GOC has it nailed.

Is that like a strap-a-dyck-to-me?

 

[barbagris]

Is that like a strap-a-dyck-to-me?

I don't know - is it? :

 

[Ozarksflyfisher]

Would the holes all line up on the 17610 aftermarket starter? Or would it need special fitting? What brand is the best for the $?

 

[Tal]

Mrs barbagris says Mrs GOC has it nailed.

Well if you fiddle with it for a while, it should start by itself???

 

[barbagris]

Well if you fiddle with it for a while, it should start by itself???

Depends how cold it is out.

 

[Joesmoe]

@Ozarksflyfisher et al: Take a look here:

Inexpensive Starter Replacement