Spot of trouble with clutch

[Wrecka]

Hey all,
have installed Rivco RIsers , when i was routing cables i had trouble undoing the clutch cable , so silly me undid and removed the lower clutch cable lever off the splined shaft coming out from the engine , went to put it back together but now theres way to much slack in the cable , question is

: do i have to preload the clutch ?
: if so at what position do i need to place the lever on to start the preload ?

 

[Trirocket3]

Did you remove the splined arm ?
If you did you should align the dots on shaft & arm

 

[Wrecka]

Did you remove the splined arm ?
If you did you should align the dots on shaft & arm

There's dots ?

 

[TOMCAT]

Sure one of the more technical Members can post a pic of where the arm should sit on the shaft. That's the problem .. where arm should sit on shaft to give you right amount of cable length .. yeh?

 

[Evil Mitch]

There's dots ?

Ill go outside and take a happy snap hang on mate

 

[Evil Mitch]

here ya go mate hope it helps

 

[Wrecka]

Sure one of the more technical Members can post a pic of where the arm should sit on the shaft. That's the problem .. where arm should sit on shaft to give you right amount of cable length .. yeh?

Yeah mate thats what im looking for , rmembering it's a 2013 R3R , cheers

 

[Wrecka]

here ya go mate hope it helps

Fkn awesome Mitch cheers mate

 

[Wrecka]

Time to crack another longneck of Bundy and cola in celebration......

 

[CanberraR3]

Awesome Mitch.
Now I'd like TC or Bruce to explain how you put those yellow arrows on there.