Spot of trouble with clutch

Wrecka

Living Legend
Joined
Mar 19, 2006
Messages
3,161
Location
Pimpama
Ride
2013 R3R
Hey all,
have installed Rivco RIsers , when i was routing cables i had trouble undoing the clutch cable , so silly me undid and removed the lower clutch cable lever off the splined shaft coming out from the engine , went to put it back together but now theres way to much slack in the cable , question is

: do i have to preload the clutch ?
: if so at what position do i need to place the lever on to start the preload ?
 
Did you remove the splined arm ?
If you did you should align the dots on shaft & arm
 
Sure one of the more technical Members can post a pic of where the arm should sit on the shaft. That's the problem .. where arm should sit on shaft to give you right amount of cable length .. yeh?
 
TOMCAT said:
Sure one of the more technical Members can post a pic of where the arm should sit on the shaft. That's the problem .. where arm should sit on shaft to give you right amount of cable length .. yeh?
Click to expand...
Yeah mate thats what im looking for , rmembering it's a 2013 R3R , cheers
 
You must log in or register to reply here.

Similar threads

eliminating clutch switch
Replies
4
Views
420
Journeyman
LOW Hydrolic Clutch Fluid
Replies
2
Views
281
atomsplitter
R3 r clutch
Replies
8
Views
530
Journeyman
Clutch lifter spacer??
Replies
6
Views
847
Kevin frazier
Clutch pressure plate lifter bearing.
2
Replies
13
Views
1K
Rocket Scientist
Menu
Log in
Register