Rocket 3R gear shift adjustment

Bristol Steve

Standard Bore
Joined
Aug 17, 2021
Messages
5
Ride
Rocket3 R and Thruxton RS
Can someone please advise on how to adjust the shift peddle to give me a bit more space for my UK size 10 1/2 feet between the shifter and the peddle. The handbook says go to your dealer. Is this because the gear change thread will have to be adjusted as well?
Thanks in advance for any help
 
Undo the locking nut on the shift linkage rod and wind the threaded rod out so that it lengthens the length of the rod, lifting the gear shift lever until your boot fits under then tighten up the locking nuts.

Worked for me same size boot as well.

1629338247880.png
 
Undo the locking nut on the shift linkage rod and wind the threaded rod out so that it lengthens the length of the rod, lifting the gear shift lever until your boot fits under then tighten up the locking nuts.

Worked for me same size boot as well.

1629338247880.png
Thank you very much 👍
 
Undo the locking nut on the shift linkage rod and wind the threaded rod out so that it lengthens the length of the rod, lifting the gear shift lever until your boot fits under then tighten up the locking nuts.

Worked for me same size boot as well.

1629338247880.png
John thanks again opération performed and road tested. Perfect cheers mate 👍
 
Back
Top