Roadster 2014 Handle bar riser thread fitting

Mr G said:

I have a pair of risers from my previous bike I would like to have a go at fitting to raise the handle bars up a bit but they have the threads already attached and are 12 mm where as correct me if I'm wrong the Triumph has a 10mm thread .
Will the hole going through the yolks allow for 12mm bolt or would I have to rethread down to 10mm .

Click to expand...

Mr G said:

I have a pair of risers from my previous bike I would like to have a go at fitting to raise the handle bars up a bit but they have the threads already attached and are 12 mm where as correct me if I'm wrong the Triumph has a 10mm thread .
Will the hole going through the yolks allow for 12mm bolt or would I have to rethread down to 10mm . TIA

Click to expand...

kipper said:

The holes in the yolk are too small for 12mm bolts .I got another yolk from ebay and drilled it .

Click to expand...

Rocket Roge said:

you can get a 12mm male to 10 mm female stainless adapter from hong kong, just make sure to get the right pitch.

Thread Adapters - M12x1.25 Male to M10x1.25 Female - Threaded Reducers Bushing | eBay

Female End: M10X1.25mm. Male End: M12X1.25mm.

www.ebay.co.uk

Click to expand...

Mr G said:

Do you think the that the thread can be unscrewed from the risers and the thread inserts put in or are they bonded in ?

Click to expand...