RIII Touring Auxiliary Lights

warp9.9 said:

you will be able to see right thru it and tell if its burnt. If it wasn/t happening before you took it in for the speedo my money is on a loose conenctor under the tank.

Click to expand...

RedRocket said:

May have to take it back to the dealer Fish

Click to expand...

mopac said:

Call Clinton Cycles and arrange to have them look at it while u wait so u don't mess up the warrenty. My guess is a loose connection since they were in there right before, should be a simple fix.

Click to expand...

GPM said:

I'd suggest following the wire from the offending light back to the connection at the wiring harness. That will require removing the instrument cluster, and lifting the tank. There's a prop wand attached to the right side frame rail under the tank (in case you haven't done that before). Look for any place that it might be pinched or where the insulation may have been stripped. Also, when you get to the connection, re-seat it. If everything is good from the light to the wiring harness then the problem most likely is in the harness. That's going to require getting the dealer involved.

FWIW, I've had mine installed for 3000 miles with no problems.

Good luck.

Click to expand...

valk97goose said:

Could be a problem with the relay. Its located under the tank, it plugs into a socket. maybe it has come loose or whatever.

I just installed mine a couple of weeks ago and had no problems...

Click to expand...

NativeOne said:

Hey Fish! :wink: Typical guvment employee! :wink: Fix the ****ed thing would ya!

Native One

Click to expand...

Fishbein said:

NativeOne said:

Hey Fish! :wink: Typical guvment employee! :wink: Fix the ****ed thing would ya!

Native One

Click to expand...

I'd rather talk about it some more.... :lol: I haven't been home, and WHERE are my pictures, YOU Govt employee!

Click to expand...