RIII Touring Auxiliary Lights

[Fishbein]

you will be able to see right thru it and tell if its burnt. If it wasn/t happening before you took it in for the speedo my money is on a loose conenctor under the tank.

Thanks, bro!

 

[Fishbein]

May have to take it back to the dealer Fish

I know, hoping don't have to...been there WAY too much!

 

[Fishbein]

Call Clinton Cycles and arrange to have them look at it while u wait so u don't mess up the warrenty. My guess is a loose connection since they were in there right before, should be a simple fix.

Thanks. I've been trying to avoid going back...been there about 4 times in 2 months.

 

[Fishbein]

I'd suggest following the wire from the offending light back to the connection at the wiring harness. That will require removing the instrument cluster, and lifting the tank. There's a prop wand attached to the right side frame rail under the tank (in case you haven't done that before). Look for any place that it might be pinched or where the insulation may have been stripped. Also, when you get to the connection, re-seat it. If everything is good from the light to the wiring harness then the problem most likely is in the harness. That's going to require getting the dealer involved.

FWIW, I've had mine installed for 3000 miles with no problems.

Good luck.

Thanks for the directions...I'm a good rider, but not the best mechanically, but I'll take a look. If it looks too complex I'll take it back to them. Just frustrated b/c the bike runs great, but having tons of electrical issues...I was worried about that b/c I heard about electrical issues w/ Triumph but thought they had them all resolved.

 

[Fishbein]

Could be a problem with the relay. Its located under the tank, it plugs into a socket. maybe it has come loose or whatever.

I just installed mine a couple of weeks ago and had no problems...

Cool, yeah I put about 2,500 miles on mine with no problems, then 1 outer light went, so I got a new bulb, installed it, no problem, then next thing I knew, both were out, and I knew it couldn't be both bulbs went bad with a brand new one in. Definitely the connection.

 

[NativeOne]

Hey Fish! :wink: Typical guvment employee! :wink: Fix the ****ed thing would ya!

Native One

 

[NativeOne]

Hey Fish! Typical guvment employee! :wink: Fix the ****ed thing already!

Native One

 

[mopac]

i agree it must be a loose connection or pinched wire

 

[Fishbein]

Hey Fish! :wink: Typical guvment employee! :wink: Fix the ****ed thing would ya!

Native One

I'd rather talk about it some more.... :lol: I haven't been home, and WHERE are my pictures, YOU Govt employee!

 

[NativeOne]

Hey Fish! :wink: Typical guvment employee! :wink: Fix the ****ed thing would ya!

Native One

I'd rather talk about it some more.... :lol: I haven't been home, and WHERE are my pictures, YOU Govt employee!

I told you before, I am not sending you naked pictures of my wife, so stop asking ****it!

Native One