Rebuilding the Trike

Pablouk

R3Triker
Joined
Jun 19, 2017
Messages
202
Location
YATELEY, HAMPSHIRE, UK
Ride
2008 Rocket 3 with 2015 motor
Rigid axel gone, now full IRS, used a plethora of TVR parts. Thanks to help from trikeshop in Cardiff.
IMG-20200911-WA0002.jpg
IMG-20200919-WA0000.jpg
IMG-20200919-WA0001.jpg
IMG-20200919-WA0002.jpg
IMG-20200919-WA0003.jpg
IMG-20200919-WA0004.jpg
 

Attachments

  • IMG-20200907-WA0001.jpg
    IMG-20200907-WA0001.jpg
    250.5 KB · Views: 44
  • IMG-20200907-WA0000.jpg
    IMG-20200907-WA0000.jpg
    318.2 KB · Views: 46
  • IMG-20200907-WA0002.jpg
    IMG-20200907-WA0002.jpg
    233 KB · Views: 46
  • IMG-20200909-WA0000.jpg
    IMG-20200909-WA0000.jpg
    120.6 KB · Views: 48
Last edited:
Body is coming along sl8w but will be done by winters over. When done and painted I might actually get around to fitting the keyless kit that's been on the shelf ages.
 
Still working on it, got cable operated latches to open boot, but in will change to solenoid set up later. Not sorted lights I was thinking of putting them in the venturi opening. I'm going to fit two radiator setups one in each venturi at front opening and remove the existing radiator from front end. I asked Triumph if it was possible to switch around the return feed and blank on water jacket at the back of the block. They could not answer. You guys got any ideas?
 

Attachments

  • IMG-20200919-WA0011.jpg
    IMG-20200919-WA0011.jpg
    147.3 KB · Views: 31
  • IMG-20200919-WA0012.jpg
    IMG-20200919-WA0012.jpg
    298.9 KB · Views: 31
  • IMG-20200919-WA0005.jpg
    IMG-20200919-WA0005.jpg
    328.8 KB · Views: 29
  • IMG-20200919-WA0006.jpg
    IMG-20200919-WA0006.jpg
    214.5 KB · Views: 29
  • IMG-20200919-WA0007.jpg
    IMG-20200919-WA0007.jpg
    231 KB · Views: 33
  • IMG-20200919-WA0008.jpg
    IMG-20200919-WA0008.jpg
    257.6 KB · Views: 30
  • IMG-20200919-WA0009.jpg
    IMG-20200919-WA0009.jpg
    147.6 KB · Views: 30
  • IMG-20200919-WA0010.jpg
    IMG-20200919-WA0010.jpg
    243 KB · Views: 30
Back
Top