Rebuilding the Trike

Pablouk

R3Triker
Joined
Jun 19, 2017
Messages
211
Location
YATELEY, HAMPSHIRE, UK
Ride
2008 Rocket 3 with 2015 motor
Rigid axel gone, now full IRS, used a plethora of TVR parts. Thanks to help from trikeshop in Cardiff.
 

Attachments

  • IMG-20200907-WA0001.jpg
    250.5 KB · Views: 110
  • IMG-20200907-WA0000.jpg
    318.2 KB · Views: 103
  • IMG-20200907-WA0002.jpg
    233 KB · Views: 147
  • IMG-20200909-WA0000.jpg
    120.6 KB · Views: 152
Last edited:
Body is coming along sl8w but will be done by winters over. When done and painted I might actually get around to fitting the keyless kit that's been on the shelf ages.
 
Still working on it, got cable operated latches to open boot, but in will change to solenoid set up later. Not sorted lights I was thinking of putting them in the venturi opening. I'm going to fit two radiator setups one in each venturi at front opening and remove the existing radiator from front end. I asked Triumph if it was possible to switch around the return feed and blank on water jacket at the back of the block. They could not answer. You guys got any ideas?
 

Attachments

  • IMG-20200919-WA0011.jpg
    147.3 KB · Views: 132
  • IMG-20200919-WA0012.jpg
    298.9 KB · Views: 84
  • IMG-20200919-WA0005.jpg
    328.8 KB · Views: 74
  • IMG-20200919-WA0006.jpg
    214.5 KB · Views: 91
  • IMG-20200919-WA0007.jpg
    231 KB · Views: 113
  • IMG-20200919-WA0008.jpg
    257.6 KB · Views: 129
  • IMG-20200919-WA0009.jpg
    147.6 KB · Views: 135
  • IMG-20200919-WA0010.jpg
    243 KB · Views: 79
You must log in or register to reply here.

Similar threads

Fitting a Hyper Pro Steering damper to a 2.3 Rocket 3R Trike
Replies
3
Views
190
Chariot
Test Rode The R3... But....
2
Replies
12
Views
865
rick danger
The clutch saga continues...
Replies
1
Views
666
TURBO200R4
Unknown part found under the seat
Replies
5
Views
1K
acim
Rocket III Trike Reverse?
Replies
6
Views
3K
Micksan
Menu
Log in
Register