Rear wheel bearing/need a new rim

[Mongler07]

100%
It would be a problem of the shoulders were not deep enough. The torque is on the inner races and the axle sleeve spacers and not the wheel.

 

[Gregger]

100%
It would be a problem of the shoulders were not deep enough. The torque is on the inner races and the axle sleeve spacers and not the wheel.

Agreed +1

 

[Claviger]

One option is getting a non-abs wheel and drill/tap the holes for the abs ring. The flat area is already present as I recall.

 

[Stillserving]

One option is getting a non-abs wheel and drill/tap the holes for the abs ring. The flat area is already present as I recall.

Definately an option depending on what the machine shop says.