O2 Sensor

Pig9r said:
That is correct. Areas where the ECU is in closed loop it will add fuel trims to lean out the air fuel ratio.
Click to expand...

Then the end result would basically be by getting rid of the 02 sensor your tune that you load will stay true and not be adjusted by what the 02 sensor was reading?

This is why it's recommended that you reload your tunes occasionally I guess? If you run in open loop you shouldn't have this type of problem then??

Oh, and thanks for the answers, glad somebody knows what they're talking about.
 
Yes. And not since being able to disable the O2 sensor in Tuneboy have I had the need to reload a tune. I also installed the Dynojet O2 eliminator.
 
OK here's what I did, and somebody helppppp

I unplugged the 02 sensor and took it off and then plugged the hole in the header with an oil drain bolt. Nice and easy.

Then I opened up the tune I decided on and went to edit tune constants and unchecked the 02 sensor fitted and then saved it.

Then I downloaded the now new tune. It seemed to go well but the bottom of the screen it states that open loop condition, not yet met, or something like that.

Then I thought well, maybe I need to have the 02 sensor plugged in while uploading the new tune so I did that. I reloaded the tune and it still states that open loop condition, not yet met.

Both times when I start the bike up the check engine light is on. Help please, it's nice and I want to ride.
 
02 Replacement Warning

I replaced my 02 to sensor with a M18 drain plug, with some anti-seize in case I wanted to get it out some time. Well running OK for a few days I started hearing
what sounded like an exhaust leak. Turns out the drain plug worked its way out
and was gone. Next plug is an 18mm short reach spark plug, cranked down nice
and tight. Looks a little strange sticking out of the pipe.

mjbell1
 

I have the exact same problem...open loop condition not yet met!

And when I try to turn off the O2 sensor in Tune Constants, it just keeps coming back on - even after turning it off and saving the change and also saving the tune.

Can someone please help

thanks
 
go to dynojet/powercommander web site .. order the plug in o2 bypass for 15.00 and forget about it... i called them to order them .. comes with every predator exhaust.
 
travelguy said:
go to dynojet/powercommander web site .. order the plug in o2 bypass for 15.00 and forget about it... i called them to order them .. comes with every predator exhaust.
Click to expand...

great idea and i've already tried that...Dynotune wont ship to countries that have distributors and the local distributor in OZ wont help, so I cant get one of those plugs



Why is everything so hard!!
 
You must log in or register to reply here.

Similar threads

PCV auto tune O2 question.
Replies
2
Views
925
Jeff06098
O2 sensor turned off in custom tunes, why?
Replies
4
Views
5K
cootertwo
Autotune O2 Sensor Port
Replies
7
Views
1K
josmas
O2 sensor/tuners
Replies
8
Views
2K
warp9.9
Problems with gipro and gear position sensor
Replies
8
Views
2K
mpbpub
Menu
Log in
Register