Phil R Turbocharged Joined Mar 20, 2008 Messages 502 Location Kennewick, WA Ride 2008 Classic Sep 11, 2011 #1 I can't seem to figure out how to release the switch/wiring assembly in order to try to re-solder the break. This is what I see... Any help is appreciated.
I can't seem to figure out how to release the switch/wiring assembly in order to try to re-solder the break. This is what I see... Any help is appreciated.
Gothlander 321 GONE Joined Feb 15, 2007 Messages 1,025 Location Gold Coast Australia Sep 12, 2011 #2 Push the white plastic clips in on the black cover. Be careful or you will break the cover, if you do you can tape it up.
Push the white plastic clips in on the black cover. Be careful or you will break the cover, if you do you can tape it up.