Neck bearing replacement made easy.

sonny

Living Legend
Joined
Sep 24, 2015
Messages
8,662
Location
Henryetta Oklahoma
Ride
rocket three x
Wajhi: Here are the special tools for the job. Item 1

Motion Pro Steering Head Bearing Race Driver




Use this for installing new bearing Races. Item 2

HEAD CUP REMOVER — OVERSIZED Park Tool RT-2




This is the size required. Used to remove races. Item 3

CROWN RACE SETTING SYSTEM — OVERSIZED Park Tool CRS-15.2





Kind of self explanatory Item 4



Thin 1 1/2 wrench along with a 1 1/2 socket. This works well on the lock nut and adjustment see manual. None of these tools are top of the line but they all work rather well. Forks require a few triumph tools but we will get to that tomorrow. All the above tools can be found on the web. Just type in company name and can be found easily.
 
Last edited by a moderator:
Wow the post got change a bit. Will post the tools require for fork maintenance tomorrow.
 
Just called the closest dealer that used to be a triumph dealer....I asked him for an adjustment service cost and he quoted two hour job @ $340....and that’s only if nothing needs replacement, in which case it will
Be couple more hours....so I guess I would have to learn it so it myself....so please do share whatever golden words you have over here
 
I am off too but did not ordered all the tool shared above yet.... I thought there are more tools to be shared?

Or is this all the list?
 
Wajhi said:
I am off too but did not ordered all the tool shared above yet.... I thought there are more tools to be shared?

Or is this all the list?
Click to expand...
Yes tools to do required maintenance on front forks is coming in the morning. Been busy going back and forth with the Indian clinic and found out some bad news that screwed with me. Good now. Look I like your attitude and if you would like i can send you all the tools required as long as you promise to return said tools. Will save you some money. Then we will guide you through the process.
 
Oh man....that’s an unprecedented offer, I am over whelmed... I will be already in your debt if you just share your knowledge....
I believe this work will be needed on ongoing basis so I should rather invest in the tools myself......so will wait for the entire list from you, no rush....I will ride below 100mph until then
Thanks again for all the help
 
You must log in or register to reply here.

Similar threads

Front brake disks (rotors) with ABS replacement
Replies
5
Views
325
atomsplitter
Rear wheel bearing/need a new rim
2 3
Replies
23
Views
2K
Stillserving
Temporary pipe replacement and tune
Replies
3
Views
648
sleeves
What are some good easy to install LED headlamps that I should get?
Replies
5
Views
879
barbagris
Swingarm bearings
Replies
3
Views
918
Mittzy
Menu
Log in
Register