Mr. Bryant...

[Tal]

Im thinking....just do what they did on the "Building a Rocket 3 "video...just make a small set,perfectly, then add a bottle of steroids!!..KAPOW!!!...biggies!!

 

[mully95]

And one thing to note;
There is more to the Carpenter pipe than meets the eye ........ and it's not the pipe

Hmmmmmm... what could that be I wonder?

 

[WyldCFH]

Paul,
Gratitude for your response.
Tis a darn shame because those look sweet!!!
What about going forward off the head then down between the radiator and brake pedal then go rearward, under the peg rail along the case, under the master cylinder and then out to the rear axle with the can?
If tucked under and inboard of the peg there should be enough clearance, even for a twisty hoon like me.

@Penner built something like this. He has a thread with pics around here somewhere

 

[ratsidecar]

Would that be the machined flange paul? And by any chance would it butt up against the exhaust port exit on the head rather than slipping inside?

 

[Paul Bryant]

Would that be the machined flange paul? And by any chance would it butt up against the exhaust port exit on the head rather than slipping inside?

Yes and No

 

[ratsidecar]

hmm, interesting how many guesses do I get? Or would you like to spill the beans

 

[Mittzy]

Similar, but not the same.
Please ponder my idea and let me know what springs forth.

Hey Bull,
I popped over to @ozrider 's workshop before Christmas (When I blew my Clutch to bits) and saw him making these pipes.
I don't know much more about them at this stage. But NO Springs and full 2" header.
Ozrider has been in the motorsport industry for about 40 years.
These pipes have not yet been tested on a dyno but will be shortly.

 

[Claviger]

Looks very similar to another set I’ve seen somewhere, but better

So @ozrider interested in doing up a couple more sets? ( I’m dead serious by the way)

 

[sonny]

I'll pass. The heat coming off the top pipe next to the valve cover may be OK for some but to me it looks like it very well could become a problem. Could be wrong. I'll stick it out with this.

 

[1olbull]

Looks very similar to another set I’ve seen somewhere, but better
So @ozrider interested in doing up a couple more sets? ( I’m dead serious by the way)

Tony @Mittzy
I to am very interested, but wish to see a rider astride in order to view the leg clearance.