mirrors are crap!

@TRIIICK i soldered them in then shrink wrapped them. Didn't change the relay and the still blink fine. Quick easy job. Just did it right on the bike. When I get home I'll try to take a pic of where I joined them.
 
@TRIIICK Here's a snapshot of the joining area. I just ran them under the neck with the stock wires, then soldered in place under the tank (red shrink wrap) joining each respective blinker.
 

Attachments

  • image.jpg
    635.3 KB · Views: 2
Warpo,
Do you actually use that heel/toe shifter???
Say it ain't so, Bucko!?!?!?
 
I agree I like the stock mirrors I also have a set of the teardrops that I don't like
 
Went with the rivco signal mirrors. Great view and bright lights. R3 sells the adapters for the standard mirror setups; around $30 I think, but didn't need them for the Rivcos as they came with them.

The Rivco are what I have.
A great mirror that provides added safety and allowed me to eliminate toe fugly front signals!
Likely too spendy for your taste, however.
 
I too like the stock mirrors and when the vibrations gets bad it's time to adjust your valves.
 
The Rivco are what I have.
A great mirror that provides added safety and allowed me to eliminate toe fugly front signals!
Likely too spendy for your taste, however.
Not at all bull, Been running them on my for little over a year. Absolutely love them. Didn't say I never splurge
Just can't do $900 fog lights
 
Not at all bull, Been running them on my for little over a year. Absolutely love them. Didn't say I never splurge
Just can't do $900 fog lights

Heh heh heh
Twas referring to the OP's comments.
You are indeed correctamundo if you be referring to the cost of the Clearwater Erica 6000 lumen each, fog lights.
BUT, they are a sweet looking light.