Maybe a silly question

cootertwo

Living Legend
Joined
Mar 24, 2013
Messages
2,113
Location
Labelle Florida USA
Ride
2013, & 2 05's R3R, 2006, 2004 Harley's, 2004 Kaw
I was wondering, how many revolutions of the crankshaft does it take, to fire all 3 cylinders? Also does the crank position sensor send only one signal, per one revolution of the crankshaft?o_O
 
Two revolutions are needed to fire all three cylinders. Then you are back at the front of the firing order ready to do it again. I don't know the answer to your second question.

Later,
Jerry C
 
Warp, was just wondering if a simple electronic ignition module could be made to work off the crank position sensor, and then use 3 carburetors. Never seen it done on a Rocket, yet. The benefit being simplicity.
 
20181016_140923.jpg
 
Warp, was just wondering if a simple electronic ignition module could be made to work off the crank position sensor, and then use 3 carburetors. Never seen it done on a Rocket, yet. The benefit being simplicity.

And go for one of those Triple choke down draft Webers :D
Now that would look cool.

1533766361d5baaab2893c3E5F61E1-655C-4FFA-8B08-C10E2D29503B.jpeg


Finding some one to tune it would be tricky.
These are amazing Carbs, very complex, but with some one who knows what they are doing they can be made to run awesomely.
 
Had a little experience with a two barrel Weber on my Pop's hopped up Austin Healy Sprite. Nice that you can not only change all the jets, but the venturi too!
 
Back
Top