Matching Fuse Sizes with Accessories

Just received my Eastern Beaver PC-8 kit yesterday and am starting the install. I am in the process of setting up my switched and unswitched fuses and am wondering which fuse size should pair up to which accessory.

I have or anticipate having the following accessories:

1) Gi Pro
2) Headlight Relay
3) GPS
4) Scorpio i900 alarm
5) Stebel Horn (which will go straight to the battery)
6) Heated gear (which I anticipate plugging into the auxiliery outlet on the left side of the bike - ordered the Powerlet for this)
7) Radar detector

Which fuse size would be appropriate for which accessory?

The instructions (for most of the items) have the power requirements and would be your best reference.

As an example:

the garmin zumo 665 uses an in-line fuse in its hard wire harness (3a or 5a, can't remember). use the same size in the pc8.

Your not limited to the fuse sizes in the kit. you can mix & match to your equipment just as long as you don't exceed the max amp for the switched (40a) or unswitched (20a) sections.