ponysoldier
.040 Over
Hi guys. still waiting for the fun machine, but doing my homework. does anyone know if you can lift the scooter on the oil pan without damage. I prefer to do my own servicing, so need to know.
lifting R3
- Thread starter ponysoldier
- Start date
ogmf
.020 Over
Jusk asked the same question the other day 
Everybody said yes you can. So I'm now about to change my rear tyre (Waiting on getting the tyre delivered from USA grrrrr) and have all ready liftet the beast up...On the oil pan.
Everybody said yes you can. So I'm now about to change my rear tyre (Waiting on getting the tyre delivered from USA grrrrr) and have all ready liftet the beast up...On the oil pan. ponysoldier
.040 Over
R3 lifting
thanks for the quick response. good to know. this tyre changing seems to be a bit of a bummer, by the sounds of things I'll leave it to the pro's. :shock:
thanks for the quick response. good to know. this tyre changing seems to be a bit of a bummer, by the sounds of things I'll leave it to the pro's. :shock:
ogmf
.020 Over
Yes me too. Just removing rear wheel myself. The dealer is doing the tyre change.
Skid Mark
.040 Over
Had my rear tire changed out at 4800 miles, had the dealer do it ( BackRoads ) They had a cradel that went around cat box and contacted the frame at two ears that had a hole in them , a steel pin was installed through the cradel into the hole. All in all a pretty trick setup.
tmiller
.060 Over
If you lift it on the oil pan, it is rear heavy. You will need to tie down the front end to get the rear off the ground. If you have the catbox, and lift there, it will work.
ponysoldier
.040 Over
lifting gear
thanks for the piccy looks good to me as i have the same type of jack. looking forward to further piccys. should be easy to make as well. just a bolt thru the holes or do you need to nut them as well. got the good news today that my scooter should be in the state next monday. and then just a day or two to fit extras and rego.
thanks for the piccy looks good to me as i have the same type of jack. looking forward to further piccys.
should be easy to make as well. just a bolt thru the holes or do you need to nut them as well. got the good news today that my scooter should be in the state next monday. and then just a day or two to fit extras and rego.
