LED Auxiliary Brake Light

[Mike Enfinger]

I want to install this LED brake light on my 2015 R3T. Can I just connect to my stock brake light wire? On the stock wiring, which is the brake light wire? Red or blue?

 

[Mike Enfinger]

Well I tried the red wire first and the running light came on. Switched over to the blue wire and the brake light worked.

 

[HansO]

Well Done!!! you can never have enough brake light to alert the tin tops

 

[Mittzy]

I just upgraded my indicators to 10w LED - Will do a write up

 

[barbagris]

I just upgraded my indicators to 10w LED - Will do a write up

Yup I did mine ages ago - Amber leds. Also have red leds in parallel in the rear - with a brake activated flasher

 

[Mittzy]

Yup I did mine ages ago - Amber leds. Also have red leds in parallel in the rear - with a brake activated flasher

Break light is next

 

[Mittzy]

Yup I did mine ages ago - Amber leds. Also have red leds in parallel in the rear - with a brake activated flasher

Red LEDs behind a red lens? What wattage did you use? 10w brake and 5w tail?

 

[barbagris]

10W RED LED (BRAKE)and 10W AMBER LED - under smoked lenses (clear work well too). Inside the indicator housings.
Thickish Aluminium plates to sink heat.



Single amber for the front - the second set went to LMG in the UK.



Reds flash twice then pause than flash 5 seconds. Amber are just indicators.

I have extra LED tail lights in the top case. Came already in.
Motorcycle luggage MOTOBUYKERS VIP TRUNK BLACK


Somewhere I have some R+D videos.