I have an '06 Classic including as you would expect foot boards and a heel and toe gear change...("shifter" for the Septics !!)
I like the boards, but find the heel part of the heel and toe "shifter" a pain in the arse and was wondering if there was an easy way to change to just a toe shift that didn't involve just grinding off the heel part!! I can use just the toe to change up and down but can't really get my foot properly underneath it and use the welt on the sole of my boot to "shift" up gears!
Help welcome and appreciated !
I have an '06 Classic including as you would expect foot boards and a heel and toe gear change...("shifter" for the Septics !!)
I like the boards, but find the heel part of the heel and toe "shifter" a pain in the arse and was wondering if there was an easy way to change to just a toe shift that didn't involve just grinding off the heel part!! I can use just the toe to change up and down but can't really get my foot properly underneath it and use the welt on the sole of my boot to "shift" up gears!
Help welcome and appreciated !
Apologies for not paying attention, I was having an argument with someone on UKGS'er, (Good forum by the way) Same question as Big Cruisers 4 Me, that's just the ticket, more details please if you have them,and I appreciate the photo
Apologies for not paying attention, I was having an argument with someone on UKGS'er, (Good forum by the way) Same question as Big Cruisers 4 Me, that's just the ticket, more details please if you have them,and I appreciate the photo
May not be PLUG AND PLAY - need to have a look as I THINK I had to make a different sized bush I had them on another bike and removed them when I sold it. I will have a look once the sun is up and reply again.
OK you are paying for two and bits you may not need. You can however order spare parts - that might work out cheaper but best would be to speak to them and explain so you don't miss anything. Also - I would upgrade the rod ends for GOOD Rose Joints.
OK BarbaGris. One Brake Lever, one change lever offset 5 mm, two Uniball M6, one toe peg. Will these just fit with the fixing hardware that is holding the shifter in place now?