Gearbox - exit stage left - need Robinson info

[Mittzy]

Yeh, I asked him the same thing... I wonder if he found the 2 chunks of aluminium missing from the case on the highway? That case probably should be repairable.

Gunna give it a go for sure

 

[Mittzy]

Check out the parts list (#0) here, Rotorclip, iirc these are the one Robinson uses. I don't have a Robinson'd transmission to measure up and be sure but I am certain the circlip part of his service I copied for the 6th gear project, he gave me the detail.

I have a bag of 50 of each, if you need a few posted...

2.5L Rocket Stroker Engine Kit with 6 Speed Transmission (R&D)

...I really wish that 6 speed had come to production... would solve a lot of problems I'm going to have next year. I also have been dreaming of the 6-speed.... he says it will take $100K if we can get 100 buyers to tool up and produce them.

www.r3owners.net

Thank you for the offer but Ill try and get them here - If I need some ill let you know.

 

[kenne]

Jeez mate no good, not brutus, at least you’ve got 20 others to ride.. should be able to weld just get nice and clean. Good luck.

 

[warp9.9]

Hi Scott, Going to weld up the holes - Noting to lose really

I'd give her a try to that looks like its front the fourth gear explosion. After welding I bet some sealant like epoxy for safety wouldn't hurt either.

 

[wjb]

Instead of a transmission failure, let's call this a Rapid Unscheduled Disassembly.
It doesn't sound nearly as bad that way.

 

[Mittzy]

Check out the parts list (#0) here, Rotorclip, iirc these are the one Robinson uses. I don't have a Robinson'd transmission to measure up and be sure but I am certain the circlip part of his service I copied for the 6th gear project, he gave me the detail.

I have a bag of 50 of each, if you need a few posted...

2.5L Rocket Stroker Engine Kit with 6 Speed Transmission (R&D)

...I really wish that 6 speed had come to production... would solve a lot of problems I'm going to have next year. I also have been dreaming of the 6-speed.... he says it will take $100K if we can get 100 buyers to tool up and produce them.

www.r3owners.net

Hi Mate,
Looks like i will take up your offer, Thank you.
Ill Start PM.

 

[Mittzy]

I'd give her a try to that looks like its front the fourth gear explosion. After welding I bet some sealant like epoxy for safety wouldn't hurt either.

JB Weld? or something else