Front fender rail plus embellishment

[Joesmoe]

Perhaps with your tire -- not with mine.

 

[Kevin frazier]

Not sure if the touring is like the real Rockets but if so you can pull the front fender without removing the wheel.

 

[Budski]

Perhaps with your tire -- not with mine.

Mine has the correct tire size for the bike. I had to start both bolts in the sleeves and grommets on both sides so they were most of the way in and then slide the rail into the fender and then align it and I was able to then push the bolts in the fender portion and start them by hand. If you try it by aligning the rail first in the fender and angle the bolt in it will never work. Hope this helps.

 

[Kevin frazier]

Mine has the correct tire size for the bike. I had to start both bolts in the sleeves and grommets on both sides so they were most of the way in and then slide the rail into the fender and then align it and I was able to then push the bolts in the fender portion and start them by hand. If you try it by aligning the rail first in the fender and angle the bolt in it will never work. Hope this helps.

Your avatar is cool I like those bike dollies, very cool

 

[Budski]

Your avatar is cool I like those bike dollies, very cool

Thanks, made by Condor. Work great but pricey, but also well worth the money. I have a 3 car garage with 4 cars 1 truck and 2 motorcycles. So these were a must. I have a car lift also to stack on car over another.