Micksan
Supercharged
- Joined
- Nov 16, 2010
- Messages
- 473
- Location
- Del City Ok
- Ride
- 2023 Triumph R3 GT, 2022 Moto Guzzi V85TT,
I read the download instructions , plus did some reading on this forum.
I installed the three K&N filters under the bear claw, plus now using the supertrapp w/ 12 plates and the open ended back plate..
Received a map for that set up from our friend in land of QZ. Tried it out after the 12 minute tune. Works great but is lean. Lots of back firing , when throttle let off.
I want to increase the fuel mixture by 3 to 5 percent intervals. On the F-trim I can click on a single block and do the increase with the arrows. I can right click to copy.
Now the question. I am sure that I should be able to set all of the blacks to increase by the same amount. I am also sure that it is staring me in the face . BUT I do not want to rush into anything and make things worse.
Thanks
I installed the three K&N filters under the bear claw, plus now using the supertrapp w/ 12 plates and the open ended back plate..
Received a map for that set up from our friend in land of QZ. Tried it out after the 12 minute tune. Works great but is lean. Lots of back firing , when throttle let off.
I want to increase the fuel mixture by 3 to 5 percent intervals. On the F-trim I can click on a single block and do the increase with the arrows. I can right click to copy.
Now the question. I am sure that I should be able to set all of the blacks to increase by the same amount. I am also sure that it is staring me in the face . BUT I do not want to rush into anything and make things worse.
Thanks