Hi guys and girls, I would like to pick your brains and knowledge, I have a 2013 r3r I have just put ramair, tors, and link pipe on did the 12 min tune and on decel it is popping like crazy, I have called my Dyno guy but can't get me in till mid may, so just ordered a cable for tune ECU from lonelec, does anybody have a tune I can use for this set up. Thanks in advance all. .
If your VIN is >574813, you can open stock map 20773 (the one in your ECU, unless someone has remapped it before) and copy & paste the tables from John's tune into it.
If your VIN is >574813, you can open stock map 20773 (the one in your ECU, unless someone has remapped it before) and copy & paste the tables from John's tune into it.
20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.
You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.
Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.
It has a safe AFR - wideband O2 sensor used to validate.
It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.
You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.
Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.
It has a safe AFR - wideband O2 sensor used to validate.
It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.
You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.
Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.
It has a safe AFR - wideband O2 sensor used to validate.
It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.
You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.
Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.
It has a safe AFR - wideband O2 sensor used to validate.
It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
Hi John miller tried putting tune in but no joy, my vin is above the 5 something it's in the 6s , downloaded the map in my bike and it is 20776 map. I other tune I can use? Ramair, tors , link pipe. Thanks.
Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.
It is a 20776 tune - from reports on the dyno it is a good baseline tune, just go to the resources section and download and compare to your existing tune in TuneEcu you will see the raft of changes.
Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.
It is a 20776 tune - from reports on the dyno it is a good baseline tune, just go to the resources section and download and compare to your existing tune in TuneEcu you will see the raft of changes.
Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.
It is a 20776 tune - from reports on the dyno it is a good baseline tune, just go to the resources section and download and compare to your existing tune in TuneEcu you will see the raft of changes.