Can anyone help - appropriate fuel map after mods - R3R UK

Tattoomick

Tattoo mad
Joined
Mar 6, 2019
Messages
94
Location
West Yorkshire uk
Ride
2013 Triumph rocket 3 roadster
Hi guys and girls, I would like to pick your brains and knowledge, I have a 2013 r3r I have just put ramair, tors, and link pipe on did the 12 min tune and on decel it is popping like crazy, I have called my Dyno guy but can't get me in till mid may, so just ordered a cable for tune ECU from lonelec, does anybody have a tune I can use for this set up. Thanks in advance all. .
 

R-III-R Turbo

Mine is the biggest :)
Joined
Oct 12, 2010
Messages
1,554
Location
Ireland
Ride
2.5L Stroker Rocket III, 04 Hayabusa

Tattoomick

Tattoo mad
Joined
Mar 6, 2019
Messages
94
Location
West Yorkshire uk
Ride
2013 Triumph rocket 3 roadster
If your VIN is <574812, @John Miller has a tune for TORS & ramair Roadsters downloadable from the Resources section;
2011 2011 R3R Tors Ramair with more fuel and less timing in cruise, decel pop added

If your VIN is >574813, you can open stock map 20773 (the one in your ECU, unless someone has remapped it before) and copy & paste the tables from John's tune into it.
Thanks I will look into it, I'm waiting for cable to come once it does I will see how to use the tune ECU for the bike, much appreciated.
 

John Miller

Supercharged
Joined
Jan 3, 2018
Messages
236
Location
Brisbane, Queensland Au
Ride
2011 Rocket 3 roadster
Guys the tune I have is as noted below:

20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.

You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.

Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.

It has a safe AFR - wideband O2 sensor used to validate.

It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
 
Last edited:

Tattoomick

Tattoo mad
Joined
Mar 6, 2019
Messages
94
Location
West Yorkshire uk
Ride
2013 Triumph rocket 3 roadster
Guys the tune I have is as noted below:

20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.

You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.

Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.

It has a safe AFR - wideband O2 sensor used to validate.

It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
Thanks john miller, I will have a go with This when cable comes. Much appreciated.
 

Tattoomick

Tattoo mad
Joined
Mar 6, 2019
Messages
94
Location
West Yorkshire uk
Ride
2013 Triumph rocket 3 roadster
Guys the tune I have is as noted below:

20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.

You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.

Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.

It has a safe AFR - wideband O2 sensor used to validate.

It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
John miller I tried to put tune in but no joy, my vin is above the 5 something it's in the 6. Looked
Guys the tune I have is as noted below:

20355 Baseline Dyno Tune 2011 - Thanks @Martin_Brighton_Uk I don't know if it will be compatible your 20733 ECU.

You could copy the tables and paste them across and see if it will copy, Tune-ECU will tell you if it is compatible or not. You also need to set the secondaries at 100% and copy the entire ignition table.

Don't forget to balance the throttle body's and do an ISCV reset. The O2 sensor is off - leave it off or the tune won't work in fact remove the O2 sensor and plug the fitting.

It has a safe AFR - wideband O2 sensor used to validate.

It is a little thirsty with this tune (using an extra litre+/100km over stock) but hey I didn't buy it for fuel economy.
Hi John miller tried putting tune in but no joy, my vin is above the 5 something it's in the 6s , downloaded the map in my bike and it is 20776 map. I other tune I can use? Ramair, tors , link pipe. Thanks.
 

John Miller

Supercharged
Joined
Jan 3, 2018
Messages
236
Location
Brisbane, Queensland Au
Ride
2011 Rocket 3 roadster
@Tattoomick Yeah I thought as much - its not easy if you don't have a matching tune.

There should be a matching tune in the resources section that will do the job on your machine let me take a look for you.
 

John Miller

Supercharged
Joined
Jan 3, 2018
Messages
236
Location
Brisbane, Queensland Au
Ride
2011 Rocket 3 roadster
@Tattoomick You should try this tune

Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.

It is a 20776 tune - from reports on the dyno it is a good baseline tune, just go to the resources section and download and compare to your existing tune in TuneEcu you will see the raft of changes.

That should work well for you bro.
 

Tattoomick

Tattoo mad
Joined
Mar 6, 2019
Messages
94
Location
West Yorkshire uk
Ride
2013 Triumph rocket 3 roadster
@Tattoomick You should try this tune

Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.

It is a 20776 tune - from reports on the dyno it is a good baseline tune, just go to the resources section and download and compare to your existing tune in TuneEcu you will see the raft of changes.

That should work well for you bro.
You are a absolute star you is bro the world needs more people like you in it. How do I get that tune ? Thanks pal.
 

Tattoomick

Tattoo mad
Joined
Mar 6, 2019
Messages
94
Location
West Yorkshire uk
Ride
2013 Triumph rocket 3 roadster
@Tattoomick You should try this tune

Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.

It is a 20776 tune - from reports on the dyno it is a good baseline tune, just go to the resources section and download and compare to your existing tune in TuneEcu you will see the raft of changes.

That should work well for you bro.
Got it pal , thanks
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of R3Owners. For the best possible site experience please take a moment to disable your AdBlocker for R3Owners.Net.

I've Disabled AdBlock