garyculb
.020 Over
Decided to change out my Brake Pedal Assembly from a standard Rocket to the Classic Rocket. The Classic Rocket has a larger rubber pedal on the Rear Brake Pedal Assembly. Replaced the spring, bleed the brakes, sanded/buffed down the chrome/ bolts, etc and still have a lag in the brake pedal (i.e. it stays slightly depressed). It is noticable when driving and must be manually returned to the undepressed position. When I loosen the Shouldered BOLT ( M10X1.25 ) the Brake Pedal Assembly works fine. But, when the shouldered bolt is tightened to the recommended 25nm the Brake Pedal Assembly will not return to rest/ neutral. I have taken this thing apart several times, tried different springs and I am confused. Any suggestions. Thinking of using red or blue Sure-Lock and leaving it were it works correctly.
Gary
Gary