Beware Okies
- Thread starter sonny
- Start date
TURBO200R4
stand up straight and grab the world by the a$$
sorry u had troubles hope u can fix without problems.
when a shop hires a new guy they need to keep an eye on them. so many mechanics think that u put a nut on then give it a full blast with an impac then u check it with a torque wrench until it clicks.
for example i asked a tire guy to torque my wheel to 85 pounds. i always check because my wife might need to change tire. i tried to take the nuts off it maxed out the torque wrench,took a 3 foot breaker to get the nuts off that is usually why the studs break off.
when a shop hires a new guy they need to keep an eye on them. so many mechanics think that u put a nut on then give it a full blast with an impac then u check it with a torque wrench until it clicks.
for example i asked a tire guy to torque my wheel to 85 pounds. i always check because my wife might need to change tire. i tried to take the nuts off it maxed out the torque wrench,took a 3 foot breaker to get the nuts off
that is usually why the studs break off.
sonny
Living Legend
Kind of figured something was not right with the bike. Been hearing a funny noise coming from the rear on mild takeoffs. Gee a completely frozen bearing and smashed spacer? Here Lately noticed a bit of vibration at 70 to 80 miles per hour. Figured it was Just my imagination. figured wrong. The last time I dealt with this kind of @ull**** I went on into the Harley shop and got arrested. This time I plan on using my head and not my fist.
skydog1000
Living Legend
WHAT IS ADDRESS OF THE LOCATION YOU ARE TALKING ABOUT
sonny
Living Legend
come now I am pissed off and may not have made it clear. This is the place.
skydog1000
Living Legend
SO EUROTEC IS THE WINNER WINNER CHICKEN DINNER 
sonny
Living Legend
sorry about that. At times when I get all upset I do not present a clear picture of events and current info. I have been to numerous anger management course's with little to no results. I am really pissed so I apologized for not making it clear.SO EUROTEC IS THE WINNER WINNER CHICKEN DINNER
ChicagoRocket
Supercharged
Do a chargeback on your credit/debit card and provide the evidence. You will get your money back at least. Good luck. Been there and done that. This is why I do all my own work if I can. At least if I **** it up I can only blame myself.
sonny
Living Legend
The money spent is not the issue. I do the work myself 99% of the time but after lifting the bike the first time without the proper modification to the floor jack i was a bit concerned about doing it again. Now we fabricated a plate that worked out really well and have no problem lifting the bike. My Harley (2010 Fatboy) has only been to a dealership one time. After that experience I swore off dealerships (landed In jail) Did not behave very well. Really thought that Truimph was better than that. Thought wrong. Never again.
breeze
Living Legend
they are not all bad granted a good part lots of new different equip.coming out lots of new young guys getting jobs,but not all
