rumbler05
.040 Over
Can't seem to find replacement bulbs.
Accessary liht bulbs, handlebar fuel gauge
- Thread starter rumbler05
- Start date
atomsplitter
Living Legend
- Joined
- Nov 29, 2007
- Messages
- 3,408
- Location
- Keller, TX
- Ride
- 17 T-120 Black, 20 Bobber Blk, 22 Speed Triple RS
Check with your dealer???
:whistle:
:whistle:
R-III-R Turbo
Mine is the biggest :)
- Joined
- Oct 12, 2010
- Messages
- 2,411
- Location
- Ireland
- Ride
- 2472cc Supercharged Carpenter Rocket III Stroker
the foglights? yeah i momentarily tried to open one when installing them, to get a bead on the bulb size for spares, it seemed like they weren't meant to be opened.... maybe i just didnt bother with it long enough :lol:
rumbler05
.040 Over
I was hoping their was an alternative source than the dealer. Most everything is more expensive at the dealer and requires a longer trip to get them. I thought at one time someone had listed an alternate bulb and it may even had been an alternate color. Thanks
atomsplitter
Living Legend
- Joined
- Nov 29, 2007
- Messages
- 3,408
- Location
- Keller, TX
- Ride
- 17 T-120 Black, 20 Bobber Blk, 22 Speed Triple RS
You can check for a cross-reference table with Sylvania or GE and see what is a replacement bulb. You'll need the bulb number on the base to cross-reference.
rumbler05
.040 Over
Called the Lexington KY dealer on the light bulbs and was told to by the whole unit to get the bulb,ridiculous .Any one have answer to part number of any mfg for this bulb? GW
rumbler05
.040 Over
Cant seem to see a number on the bulb. MY wife says my vision is selective when it comes to small numbers!! GW
pjsmithres
SD Dreadnought
im sure its a common enough bulb.
id suggest NAPA parts if there is one near.
i've had many odd bulbs matched up at to shop nearby.
If you can't find any, there is a shop named Light Bulbs, here that has EVERY small and miniature bulb made.
I replaced my instrument lights with a equivalent LED lamp with out resistor or extra module.
id suggest NAPA parts if there is one near.
i've had many odd bulbs matched up at to shop nearby.
If you can't find any, there is a shop named Light Bulbs, here that has EVERY small and miniature bulb made.
I replaced my instrument lights with a equivalent LED lamp with out resistor or extra module.
rumbler05
.040 Over
Thanks will try all of the above
barbagris
Mad Scientist
- Joined
- Aug 1, 2010
- Messages
- 12,988
- Location
- On the verge of insanity
- Ride
- 1979 Guzzi V1000G5 - 2018 KTM 790 Duke
Triumph accessory Fog Lights use bog standard 55W H3 halogen Bulbs. With a twist.
The short power cable normally found on H3's that's terminated with a 1/4" male blade connector is hard wired. The rear plate (2 small screws) can stick to the rubber sealing flange.
I'd suggest you try and find the H3S bulbs - These have a relocated filament and twin pigtail wiring. You'll have to piss about anyway.
Gauge bulb - I've no idea - post a pic.
Another option COULD be to fit H3S (normal H3 wont fit) HID burners and convert the lamps to HID - OR convert them to LED - This is a real custom conversion job - but worth it.
The short power cable normally found on H3's that's terminated with a 1/4" male blade connector is hard wired. The rear plate (2 small screws) can stick to the rubber sealing flange.
I'd suggest you try and find the H3S bulbs - These have a relocated filament and twin pigtail wiring. You'll have to piss about anyway.
Gauge bulb - I've no idea - post a pic.
Another option COULD be to fit H3S (normal H3 wont fit) HID burners and convert the lamps to HID - OR convert them to LED - This is a real custom conversion job - but worth it.
