1/8mi drag race Touring vs the GT

Clutch pack toasted, black blue red 😎, nothing broke maybe a little warped like warpo but not broke, one steel has a definite rub thang going on. The oiling issue i think was the angle of engine, sump could not fill tank, gonna raise up the front some and try again. I wish i could drop the rear but i dont have any other shocks right now. New clutch pack going in, new oil and coolant, make a height adjustment on front end, a spring adjustment on rear and send it Saturday. 11.2 @124mph is this weeks goal. Thats unadjusted time for D/A. @Nashvegas im not gonna be easy to run down 😁😎😂
 

Attachments

  • IMG_6065.jpeg
    IMG_6065.jpeg
    193.9 KB · Views: 11
  • IMG_6060.jpeg
    IMG_6060.jpeg
    216.1 KB · Views: 10
  • image.jpg
    image.jpg
    141.4 KB · Views: 9
  • image.jpg
    image.jpg
    165.8 KB · Views: 7
Clutch pack toasted, black blue red 😎, nothing broke maybe a little warped like warpo but not broke, one steel has a definite rub thang going on. The oiling issue i think was the angle of engine, sump could not fill tank, gonna raise up the front some and try again. I wish i could drop the rear but i dont have any other shocks right now. New clutch pack going in, new oil and coolant, make a height adjustment on front end, a spring adjustment on rear and send it Saturday. 11.2 @124mph is this weeks goal. Thats unadjusted time for D/A. @Nashvegas im not gonna be easy to run down 😁😎😂
Do you like these Suzuki clutch parts better than the Barnette, and is this made for the Hayabusa. I remember R-III-R TURBO having clutch slipping problems, and he tested springs from Triumph, Barnette and Carpenter. Carpenter was best, Barnette next, and factory was the weakest. He went with Carpenter's.
 
Do you like these Suzuki clutch parts better than the Barnette, and is this made for the Hayabusa. I remember R-III-R TURBO having clutch slipping problems, and he tested springs from Triumph, Barnette and Carpenter. Carpenter was best, Barnette next, and factory was the weakest. He went with Carpenter's.
I use the red harley vrod drag bike springs. There is definitely no slippage ever😁. Zero smearing on fibers or plates , the red springs lock it down. These were referred by our engine man down under. Im ok with the suzuki stuff, ive run them before, the oem and barnett are also real good. Carpenter springs come from ape.
 
Back
Top