adjustment

Can I adjust valves while waiting for the forged pistons to arrive? Head is necessarily not fitted yet, but plan is fitting the street cams, ladder torqued to spec then measure gap and order shims: Should work OK or not?

Next project, change clutch fluid and adjust. Any input or references please. Also gonna do coolant change. Tanks in advance Mike

Good afternoon y'all... I read through this great forum that you could fit a 240/55r16 rear tire on the rocket 3 roadsters. This worked out wonderfully for me but I have a question about rake and trail (heard this from a mechanic, still looking into how it works). The question is, do I need to...

I was feeling a click when I'd come to a stop and then let off the front brake. I wasn't sure if it was a sticky caliper or the steering head bearing/adjustment. After lifting the bike and rocking the front end back and forth holding the forks I could feel it, so guessing it must be the bearing...