Search results for query: *

  1. Anthony5900

    Rear tire puncture - any emergency advice?

    i had a puncture 2 week ago now, i used a rope plug to plug it and 2 weeks on no leaks not pressure loss so ill ride it till the tyre is done. it was basically dead centre so no safety issues as far as i am concerned. but i patch any tyre as long as its not the side wall.
  2. Anthony5900

    Brake Calliper Rebuild.

    perfect, this is what i needed to read. i got seals as they were cheap and i usually replace them on a new bike i get so i know where i am at with them, have the rocket since November and done 2.5k miles on it since. i have tune ECU with licence so i should be able to bleed the brakes and abs...
  3. Anthony5900

    Brake Calliper Rebuild.

    so you are saying if i just split the callipers i will have to purge the abs ?, this is why i am asking i have heard several storys now some for you can just pop seals out clean and rebuild with you normal bleed operation, and other say if i do this i have to purge the abs system. i am still...
  4. Anthony5900

    Brake Calliper Rebuild.

    no they are not leaking, i just want to give them a real good clean and pistons a clean etc. they sound like they are beginning to bind etc so was thinking clean and strip the whole calliper.
  5. Anthony5900

    Brake Calliper Rebuild.

    Good afternoon R3 Owners, i am due new pads in the roadster 2015, it has ABS and also upon doing this i am replacing the seals on the callipers, so i just want to clarify this before i touch anything, i can strip the callipers and clean them and then just bleed them as if they are just a normal...
  6. Anthony5900

    N/A

    N/A
  7. Anthony5900

    These tires of mine... :(

    Good morning (just), I have had nothing but cruisers most of my life now, and i have used Metzlers and Bridgestone tyre across the board on different bikes, and i use nothing but Avon tyres now, even on the honda st1100 i had i used the spirit St model tyres, i have never had a slip with them...
  8. Anthony5900

    I want to buy T BARS for my 2007 R3

    i can confirm this, i got a set direct from the supplier in the UK its a small engineering firm, ive since forgotton the name but quick look up on FB and you should find him, guy is called alan. also sure i seen a guy recently selling a chrome set on the FB groups.
  9. Anthony5900

    Keyless Ignition Complete

    hence why the ignition is still in place, still usable if ever needed, have the fly screen on so can be fiddly trying to get key in and out so for simplicity and ease i did the mod, easy removable if need be. does not work for you cool, rather than commenting your negative views could have just...
  10. Anthony5900

    Keyless Ignition Complete

    Good Morning R3 Owners, i have successfully done the keyless mod, thanks to the information In @idk profile ! it was fairly easy mod to be fair, only if you can solder id say though. otherwise i would buy connectors that go in between the loom and ignition switch as an off shoot kind of deal...
  11. Anthony5900

    Resource Download Hans0 tune for 2014+ Roadster, TORs, triple/Ramair filters, ect.

    except for the stubby end can i have on my 2015 roadster, it is bones stock engine wise, im wanting to get open filters like the K&N but not a pricey, would this map work for me ? or with the stubby end can would it be too open at the exhaust end ?
  12. Anthony5900

    I need serious help with "missing spark".......

    quick read on this, i would assume battery cell is damaged but not enough that it shows while sitting, but under load that cell isnt enough to power it !. aside from the from what you have changed the only other thing in that system to go wrong would be actual coils ! unless ive skipped over...
  13. Anthony5900

    Coil Over Plug mod (COP) for standard coil removal

    Yeah I'm handy enough to do this no issues cheers
  14. Anthony5900

    Coil Over Plug mod (COP) for standard coil removal

    Some Real good information on here, my understanding is R1 coils 2002-2003 to make sure they have the correct resistance, that and to be wire in pairs so both plug red wires to live on the loom, and both black to the trigger wire on the loom, and thats it ! very simple mod in my understanding...
  15. Anthony5900

    Tune ECU Noob !

    thank you ! i will give that a watch later on when home from work, much appreciated !
  16. Anthony5900

    Comment by 'Anthony5900' in media 'FA92C20C-3799-440C-A465-43219A2D1594'

    What exhaust is this ! Looks brilliant !
  17. Anthony5900

    Tune ECU Noob !

    good morning R3 owners, i have a 2015 roadster X i am changing the exhaust and the intake soon ish, i am going for a custom exhaust standard headers into a 90 degree bend and short can under the swing arm, intake 3 mini K and N filters not the large standard 1s where you have to alter the...
  18. Anthony5900

    Hello, New Rocket X owner

    Hi Bob, I appreciate the offer but I have already got a private Reg for myself. R666 XAJ So reading from back RX for rocket X And 666 AJ is obviously personal name initials etc..
  19. Anthony5900

    Front brake switch issue ?

    2300 sorry should have stated that, yesterday switch and cables yesterday all the way down to the bulb had continuity all the way threw plug light back in now it's working.... I hate bikes
  20. Anthony5900

    Front brake switch issue ?

    Have a real wierd fault. Front brake didn't activate lights Rear does. For the last week be ther same.. Today I went fault finding, check continuity in wiring all the way down to thw tail light socket.... Plugged the light back in boom working again... But for the passed week it has not...
Back
Top