Hi, Ivé tried to search this entire forum for a base map to load the bike with the supercharger, but all I could find was mentions about changing the .dat file from tuneboy. and problems about getting a file for tuneecu, but noone seems to have posted a solution?
I just want a basemap to start up the bike and see that everything is working as it should before putting it to dyno!
Sorry for the bad guidance! Perhaps the tables can manually be copied over? You would of course need Tuneboy and tuneecu to do so. Perhaps @R-III-R Turbo has a tuneecu TTS baseman?
I'm afraid I only have the Tuneboy .dat files. A few people have asked for a TuneECU version.
If you like, I could post screenshots of all the Tuneboy map's tables, and you can manually input the values into a TuneECU map, thus creating a TuneECU version of it?
You would be a hero to a lot of people.
Lot of tedious work, I know I've done it for the Carpenter 240 map.
I'm afraid I only have the Tuneboy .dat files. A few people have asked for a TuneECU version.
If you like, I could post screenshots of all the Tuneboy map's tables, and you can manually input the values into a TuneECU map, thus creating a TuneECU version of it?
You would be a hero to a lot of people.
Lot of tedious work, I know I've done it for the Carpenter 240 map.
Yes please send them, and I will give it a try! And by the way: it was because of your instructions I got the hammer down and decided to mount the supercharger
FWIW I would only use either map as a starting point, the bike should be tuned on a dyno.
Oh and a mildly interesting fact, the map here seems to be made on bike of registration number PJ10CKK, a 2010 Roadster. My 2010 Roadster UK reg was PJ10WCR.
Yes I am waiting for an opening at the dyno anyways, but now I have something to do while waiting, and always good to have a starter map so you can at least start up the bike and have it idleing! And hopefully someone else can use it later