Tuneecu .hex file for tts supercharger??

Emmoth

.020 Over
Joined
Apr 28, 2021
Messages
42
Ride
Rocket 3 Roadster supercharged
Hi, Ivé tried to search this entire forum for a base map to load the bike with the supercharger, but all I could find was mentions about changing the .dat file from tuneboy. and problems about getting a file for tuneecu, but noone seems to have posted a solution?

I just want a basemap to start up the bike and see that everything is working as it should before putting it to dyno!

is there anyone who has the map file for tuneecu?
 
Go to the resources section on this forum. There is a TTS base map (tuneecu) for early and late model gen 1 Rockets
No the only ones I can find are the ones for tuneboy. And those files are .dat and you cant open them with tuneecu?
 
I'm afraid I only have the Tuneboy .dat files. A few people have asked for a TuneECU version.

If you like, I could post screenshots of all the Tuneboy map's tables, and you can manually input the values into a TuneECU map, thus creating a TuneECU version of it?

You would be a hero to a lot of people.

Lot of tedious work, I know I've done it for the Carpenter 240 map.
 
I'm afraid I only have the Tuneboy .dat files. A few people have asked for a TuneECU version.

If you like, I could post screenshots of all the Tuneboy map's tables, and you can manually input the values into a TuneECU map, thus creating a TuneECU version of it?

You would be a hero to a lot of people.

Lot of tedious work, I know I've done it for the Carpenter 240 map.
Yes please send them, and I will give it a try! And by the way: it was because of your instructions I got the hammer down and decided to mount the supercharger 😁
 
1620331070633.png


1620331104909.png


1620331116507.png


1620331127905.png


1620331139507.png


1620331151991.png


1620331170834.png


1620331183348.png


1620331214950.png


1620331238461.png
 
1620331281230.png


1620331293226.png


1620331303821.png


1620331315766.png


1620331324984.png


1620331337957.png



Godspeed!

FWIW I would only use either map as a starting point, the bike should be tuned on a dyno.
Oh and a mildly interesting fact, the map here seems to be made on bike of registration number PJ10CKK, a 2010 Roadster. My 2010 Roadster UK reg was PJ10WCR.
 
Yes I am waiting for an opening at the dyno anyways, but now I have something to do while waiting, and always good to have a starter map so you can at least start up the bike and have it idleing! And hopefully someone else can use it later
 
Back
Top