Tuneecu help

[Littleleelong]

hi guys seems like a really dumb ass question ... but could any one tell me how to download a map into my rocket 3t using tuneecu ...... I really want to be able to do it right ..... HansO has kindly sorted me a map for the set up I have on my bike .... but don’t want to make a mess of things by doing something wrong ......... would really appreciate it if anyone could tell me the right sequence ...... thanks a million guys

 

[GaryA]

Little,
Sorry but I am not quite at that stage yet.
Still in the process of getting everything downloaded and working, but I will be watching this thread for sure!

Good luck with it, I have done it on a Tiger 1050 a few years ago, it is fun.

 

[Grumpy Ole Codger]

Hi LLL, There is a user guide giving quite detailed instructions on the Tune Ecu website, same place you will have downloaded Tune Ecu from. Another easy option is to use the search bar in the top right of this page and there are numerous threads detailing how to use the system. Load maps, copy maps, save maps, change maps, diagnose problems...etc... Good luck with this little bit of bedtime reading

 

[Littleleelong]

Little,
Sorry but I am not quite at that stage yet.
Still in the process of getting everything downloaded and working, but I will be watching this thread for sure!

Good luck with it, I have done it on a Tiger 1050 a few years ago, it is fun.

Ok Gary ........ thankyou .....if someone could help it sounds like they could be doing many of us a favour...... thanks again Gary take care

 

[Littleleelong]

Hi LLL, There is a user guide giving quite detailed instructions on the Tune Ecu website, same place you will have downloaded Tune Ecu from. Another easy option is to use the search bar in the top right of this page and there are numerous threads detailing how to use the system. Load maps, copy maps, save maps, change maps, diagnose problems...etc... Good luck with this little bit of bedtime reading

Hi Grumpy .....ive read the instructions on site but cant seem to find the sequence of doing it......but many thanks anyway Grumpy.....Hope all is well

 

[Grumpy Ole Codger]

Its is all here on the forum too in past posts. There is an idiots guide (I managed it so it must be easy) on here. Keep looking and you will find the prize you seek and hopefully a more knowledgeable fellow than I will assist in directing to you to the correct thread.

 

[Littleleelong]

thankyou so much Grumpy

 

[Littleleelong]

Its is all here on the forum too in past posts. There is an idiots guide (I managed it so it must be easy) on here. Keep looking and you will find the prize you seek and hopefully a more knowledgeable fellow than I will assist in directing to you to the correct thread.

Thankyou so much Grumpy......

 

[BillyIndiana]

Make sure you pull the fuse for the headlight and I would recommend having a battery charger connected to the bike.

Once connected download the present soft and save it then upload the new software.

Take a look at this. first.

Oh and put the headlight fuse back in before starting the bike.

 

[Littleleelong]

Make sure you pull the fuse for the headlight and I would recommend having a battery charger connected to the bike.

Once connected download the present soft and save it then upload the new software.

Take a look at this. first.

Oh and put the headlight fuse back in before starting the bike.

THANKS so much Billy ........really appreciate it ......and i know other people will too.......a MASSIVE THANKS to you sir......kind regards lee