Blackthou
Nitrous
- Joined
- Nov 26, 2014
- Messages
- 1,365
- Location
- Essex UK
- Ride
- 2014 Black 'n' Red R3R. RamAir, Tors, DP Link pipe
Hi,
Do the throttle bodies need synchronising or checking from time to time for Val cave and if so can they be checked and balanced with TuneEcu or checked with manometer?
Can the TPS be checked and set also with TuneEcu?
One of my intakes sounds a little late/flat. Get the odd pop on rapid decel and yesterday when stationary gave the throttle a quick blip and it backfired through the intakes and cut out. Started fine again straight afterwards. Engine was warm as just done 70+ miles but bike had been standing a few weeks. Doesn't quite seem as crisp as it used to.
Many thanks
Do the throttle bodies need synchronising or checking from time to time for Val cave and if so can they be checked and balanced with TuneEcu or checked with manometer?
Can the TPS be checked and set also with TuneEcu?
One of my intakes sounds a little late/flat. Get the odd pop on rapid decel and yesterday when stationary gave the throttle a quick blip and it backfired through the intakes and cut out. Started fine again straight afterwards. Engine was warm as just done 70+ miles but bike had been standing a few weeks. Doesn't quite seem as crisp as it used to.
Many thanks