Starter swap with Toyota

[Son_Of_Dog]

Here's a link to my thread about the starter... The information is definitely in here, and I can attest that the starter motor that I've replaced mine with works nicely, once the battery actually has enough juice to turn it.
Electrical Gremlins Part 4

 

[Boog]

Here is the link to the one I used: Inexpensive Starter Replacement post #155.

 

[2014 Ride]

You can, you may want to read some threads on that. If you cant find i will help. Its more that just swapping starters, the gear needs to be changed, you need the triumph starter repair kit off ebay, parts in that kit you need. Look up starter replacement in search box, starter upgrade stuff like that, massive amounts of info that will assist in this change.

What is the part#for repair kit??

 

[Kevin frazier]

What is the part#for repair kit??

TRIUMPH ROCKET III STARTER MOTOR SOLENOID REPAIR KIT ( 428000-1810 or T1310300) | eBay

TRIUMPH ROCKET III STARTER MOTOR SOLENOID REPAIR KIT. The Nippon Denso starter motor fitted to the TRIUMPH can be prone to failure and is very expensive to replace. YOUR STARTER WILL HAVE THE FOLLOWING NUMBER.

www.ebay.com

 

[Kevin frazier]

Went to Inexpensive Starter Replaceme shows no gear change needed,still need a part number for the Toyota starter that will swap

The gear has to be changed no biggie

 

[2014 Ride]

TRIUMPH ROCKET III STARTER MOTOR SOLENOID REPAIR KIT ( 428000-1810 or T1310300) | eBay

TRIUMPH ROCKET III STARTER MOTOR SOLENOID REPAIR KIT. The Nippon Denso starter motor fitted to the TRIUMPH can be prone to failure and is very expensive to replace. YOUR STARTER WILL HAVE THE FOLLOWING NUMBER.

www.ebay.com

You know if there is a vidio or pics of how to install?

 

[2014 Ride]

Here is how it went

 

[TURBO200R4]

the trick is to put the nose of the original starter nose on the Toyota starter with out letting the starter parts separate.

 

[2014 Ride]

the trick is to put the nose of the original starter nose on the Toyota starter with out letting the starter parts separate.

Yep,that didnt happen

 

[JeffR3Colorado]

Hey guys, I need a little advise. I did a starter swap with a Toyota starter unit. Swapped the gear box directly on to the new motor/solenoid, trimmed the push rod by 1 1/16". It all feels good and when together easy. But all I get when I hit the starter button is 1 click. The solenoid is not engaging the starter motor. Plus it's a new battery. I am getting 11.68V to the solenoid. Any ideas what to check next????